Machining & Turning

AEI's High Performance MAZAK j-200S 5-Axis CNC Multi-Tasking Machining Center

AEI Fab's MAZAK Integrex j200s 5-Axis Multi-Tasking Machining Center

AEI's MAZAK INTEGREX j-200S 5-Axis CNC Multi-Tasking Machining Center brings maximum value, precision and throughput to the production of your complex medium-sized workpieces. The j-200S makes use of two turning spindles and a milling spindle to productively process parts complete in single setups. all axes with these specifications:

CAPACITY:

  • Maximum Swing 20.87 in / 530 mm
  • Maximum Machining Diameter 19.690 in / 500 mm
  • Maximum Machining Length 35.820 in / 910 mm


MAIN SPINDLE:

  • Chuck Size 8 in
  • Maximum Speed 5000 rpm
  • Motor Output (40 ED Rating) 15 hp / 11 kw


SECOND SPINDLE:

  • Chuck Size 8 in
  • Maximum Speed 5000 rpm
  • Motor Output (40 ED Rating) 15 hp / 11 kw


MILLING SPINDLE

  • B-Axis Travel 240°
  • Magazine Capacity 20
  • Maximum Speed 12000 rpm
  • Motor Output (40 ED Rating) 10 hp / 8 kw


FEED AXES:

  • Travel (X Axis) 17.72 in / 450 mm
  • Travel (Y Axis) 7.87 in / 200 mm
  • Travel (Z Axis) 37.79 in / 960 mm

 

 

AEI's High Performance HAAS VF-3SSYT Vertical CNC Machining Center

AEI Fabrication's Vertical Machining Center

AEI's high-performance Super-Speed HAAS VF-3SSYT Vertical Machining Center provides the high spindle speeds, fast rapids and quick tool changes necessary for high-volume production and reduced cycle times. Our HAAS equipment features a 12,000-rpm, inline direct-drive spindle, an ultra-fast side-mount tool changer, and high-speed rapids on all axes, as well as these specifications:

TRAVELS (S.A.E.):

  • X-Axis = 40.0 inches, Y-Axis = 26.0 inches, Z-Axis = 25.0 inches
  • SPINDLE NOSE TO TABLE (~max) :: 29.5 inches
  • SPINDLE NOSE TO TABLE (~min) :: 4.5 inches

TABLE (S.A.E.):

  • Length = 54.0 inches
  • Width = 25.0 inches
  • T-Slot Width = 0.630 inches
  • T-Slot Center Distance = 3.15 inches
  • Number of Std T-Slots = 7
  • Max Weight on Table (evenly distributed) = 1,750 lb.

SPINDLE (S.A.E.):

  • Max Rating = 30.0 HP
  • Max Speed = 12,000 rpm
  • Max Torque = 90 ft-lbf @ 2000 rpm
  • Drive System = Inline Direct-Drive
  • Taper = CT or BT 40
 

 AEI's High-Performance HAAS ST-35Y CNC Turning Center

AEI Fabrication's Haas Turning Center / Lathe

AEI's HAAS ST-35Y Turning Center is designed from the ground up to provide setup flexibility, extreme rigidity, and high thermal stability.  Our ST-35Y is a mid-size big-bore lathe that has a medium footprint, yet provides a generous work envelope, as well as these specifications:

SWING DIAMETER (S.A.E.):

  • Over Front Apron = 31.8 inches
  • Over Cross Slide = 20.8 inches
  • Over Tailstock = 23.0 inches

CAPACITIES (S.A.E):

  • Chuck Size = 12.0 inches
  • Max Cutting Diameter (varies with turret) = 21.0 inches
  • Max Cutting Length (without workholding) = 26 inches
  • Bar Capacity = 4.00 inches
  • Between Centers = 30 inches

TRAVELS (S.A.E.):

  • X Axis = 12.5 inches
  • Z Axis = 26.0 inches

SPINDLE (S.A.E.):

  • Spindle Nose = A2-8
  • Max Rating = 40.0 hp
  • Max Speed = 3200 rpm
  • Max Torque = 425 ft-lbf @ 325 rpm
  • Spindle Bore ø = 4.62 inches

TURRET (S.A.E.):

  • Number of Tools = 12-Station BOT
  • OD vs ID Tools = Any Combination (will vary with turret)
  • Boring Bar Rear Clearance (from back of turret ) = 4.00 inches